iSys iTerra Lite Color Inkjet Printer - Manual (Page 28)

28
Installation of the Desktop Input and Output media Trays
DESKTOP INPUT TRAY INSTALLATION
Figure # Install 1
Input Media Tray - Desktop iSys
Part# KIT-PPR-IT8LD
Figure # Install 2
Output Media Tray – Desktop iSys
Part# KIT-PPR-IT8LDR
a) In preparation for installation, assemble all the parts in the intended installation area. This
should be on a flat tabletop area with space in front for the trays to sit not interfering with traffic
flow. You will need a Phillips and a Standard Slotted screwdriver.
Figure # Install 3 Figure # Install 4
b) Place the base plate from ‘Install1’ figure on the table as in figure ‘Install3’, hanging over the
edge of the table with right angle firmly against the table top.
c) Position the printer on top of the plate ensuring that the rear printer feet are in the hole slots
cut into the base plate (at rear of plate). Positioning of the printer should be as in figure
‘Install4’.
Figure # Install 5 Figure # Install 6