iSys iTerra Lite Color Inkjet Printer - Manual (Page 35)

35
Page 3
Control Panel
LCD Contrast – Allows you to select from 1 – 8 the contrast of the lighting on your display.
Different environmental operating conditions may require this setting to be adjusted.
Sound Options – Allows you to set your error sounds by time (30 sec, 5 sec, or Off). When sound
audible is active, press any front panel key and beeping will stop.
Firmware Upgrade
This allows you to upload a firmware file, provided by iSys - The Imaging Systems Group Inc., from
your host computer. (Options are Upload File – Yes/No)
Instructions and new firmware will be posted on the website: www.isys-group.com. You will
normally be notified by iSys - The Imaging Systems Group Inc. if updating is required.
Front Panel Soft Power Off and On
This printer is equipped with a ‘soft power off’ and on setting that is most useful for printers
installed in a rack mount setting. This feature can be accessed when panel display is in the main
status mode. ‘Soft power off’ the printer by pressing the middle front panel button for greater than 2
seconds. Printer will go into powered off mode and yellow status light will blink once per second.
Power the unit back on by pressing the middle front panel button for greater than 2 seconds.
Printer will go through standard boot up sequence.
Maintenance
REPLACING INK CARTRIDGES
1. Power must be on when loading and unloading ink cartridges. Place printer offline.
2. Open printer by pushing the front black levers toward each other (located on the left and right
side of the front of the printer)
3. Slide printer forward
4. For each cartridge – raise cradle latch, insert print cartridge, then close cradle latch
5. Close
unit
6. Place printer back online
7. Run Pen Alignment for proper registration
PRINT ENGINE EXPECTANT LIFE CYCLE
Your printer engine is warranted for 60,000 sheets (8.5” x 11”), or 55,000 feet, or 105,600 well log
sheets (6.25” in length) or six months (which ever occurs first).