iSys iTerra Lite Color Inkjet Printer - Manual (Page 3)

3
iSys is an ISO 9001 Registered Firm
Thank you for selecting the iTerra Lite. iSys will make every effort to assist you with operation of
your new printer. It is our sincere desire that your ownership experience meets your highest
expectations.
This user guide is provided to help you easily install and operate your new printer. It contains
important information on the features and functions of the iTerra Lite. Please read this manual
before using the printer, in particular the Installation and Operation Chapters, and the “Regular
Maintenance” section in the Maintenance Chapter. Pay special attention to warnings, cautions and
notes.
WARNING: A WARNING indicates the potential for personal injury.
CAUTION:
A CAUTION provides additional information which, if ignored, may result in equipment
malfunction, damage or personal injury.
NOTE: A NOTE indicates special attention is required.
This Symbol indicates an area of possible concern due to
static discharge into the circuitry. When you see this
symbol in the manual, please observe proper precautions
to minimize damage to circuitry.
ILLUSTRATIONS: Illustrations and components are representative only. Your unit may differ
slightly from those pictured in this document.
Need Help?
If you require additional assistance or information, please contact the iSys Technical Support team
at:
iSys - The Imaging Systems Group Inc.
911 28th Street N.E.
Calgary, AB T2A 7X1
Canada
Toll Free in North America: 1-800-415-4797
Phone: (403) 204-5212
Fax: (403) 204-1971
E-mail: [email protected]
THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. EXCEPT
AS PROVIDED BY LOCAL LAW, THE IMAGING SYSTEMS GROUP INC. (ISYS) MAKES NO WARRANTY OF ANY
KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ISYS SHALL NOT BE LIABLE FOR ERRORS
CONTAINED HEREIN OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE
FURNISHING, PERFORMANCE OR USE OF THIS MATERIAL.
Trademarks: Centronics is a trademark of Centronics Data Corp. Veratec is a Trademark of Xerox Corp.