Casio YA-S10 Setup Guide - Manual (Page 2)

E-1
Safety Precautions ..................................... E-3
Operating Precautions ............................... E-8
YA-S10 Overview ...................................... E-10
Unpacking ....................................................E-10
Getting Ready ........................................... E-11
Supported Projectors ...................................E-11
Projector Installation ....................................E-11
Wiring ...........................................................E-12
Preparing the Remote Controllers................E-13
Configuring the Initial Settings of
the Projector(s) Connected to
the Control Box.........................................E-13
Configuring Initial Control Box Settings .......E-14
Adjusting the Position of the Projector(s).....E-15
Shaping the Image to Match
the Projection Screen ...............................E-18
Using Shaping Functions .........................E-24
Shaping Type: Flat....................................... E-24
Shaping Type: Cylinder 1 or Cylinder 2....... E-25
Shaping Type: Free Style ............................ E-26
Performing Detailed Correction................... E-27
Adjusting the Aspect Ratio of
the Projected Image ..............................E-30
Normal Operation after Getting Ready ...E-31
Product Specifications .............................E-32
Terms and Conventions
The term “Projector System” in this manual refers to the systems below.
z XJ-SK600 Dual Projection System
z XJ-SK650 Dual Projection System
z The projector systems made up of the YA-S10 Geometric Correction Box connected to one or two
separately available CASIO projectors
NOTE
z Some models covered by this manual may not be available in certain geographic areas.
User Documentation
This manual explains how to connect a projector (or projectors) to the YA-S10 Geometric Correction Box
(referred to as “Control Box” in this manual) and how to use “shaping” functions to shape and adjust
images projected onto various types of target screens. This manual covers tasks that need to be
performed to enable control of the projector(s) with the Control Box.
z For information about operating the Projector System after setting it up, refer to the YA-S10 User’s
Guide, which you can download from the website below.
http://world.casio.com/manual/projector/
Contents