Casio YA-S10 Setup Guide - Manual (Page 33)

E-32
Product Specifications
Specifications are subject to change without notice.
Model Name YA-S10
Control Box Terminals HDMI port: HDMI TYPE A (Output: 2 channels, Input: 1 channel)
Serial port: D-Sub 9-pin (Output: 2 channels, Input: 1 channel)
RGB/component port: Mini D-sub 15-pin (Input: 1 channel)
LAN port: RJ-45 (Input: 1 channel)
Environment Operating temperature: 5 to 35°C
Operating humidity: 20 to 80% (non-condensation)
Operating altitude: 0 to 2,000 meters above sea level
Power Requirements 100VAC 240VAC, 50/60Hz
Power Consumption
(Rated Voltage/Rated Current) 12VDC 1.3A
Dimensions Approximately 216.3 (W) × 148.2 (D) × 29 (H) mm
(8.5" Ч 5.8" Ч 1.1") (Excluding projections)
Weight Approximately 0.67kg (1.5lbs)
GPL and LGPL
(1) This product uses software (This Software) that comes under the GNU General Public License
(GPL) and GNU Lesser General Public License (LGPL). In accordance with the GPL and LGPL, the
source code of This Software is open source code. Anyone who wishes to view the open source
code can do so by downloading it from the CASIO Projector download site. Whenever copying,
modifying, or distributing This Software, be sure to do so in accordance with the terms and
conditions of the GPL and LGPL.
(2) This Software is provided “as is” without expressed or implied warranty of any kind. However, this
disclaimer does not affect the terms and conditions of the warranty of the product itself (including
malfunctions due to This Software).
(3) The full text of the GPL and LGPL that covers this software can be found at the back of the “YA-S10
User’s Guide”.