Emerson Process Management ControlWave XFC - Manual (Page 139)

CI-ControlWave XFC Appendix F / F- 37
F.9 LOAD/SAVE CATEGORY FUNCTION
One WebBSI Web page is accessible under the Load/Save Category Section of WebBSI; this
is called the Meter Run Save/Load Configuration Web page (see Figure F-27).
This page allows a user to save configuration parameters from a ControlWave XFC or load
a saved configuration down to a ControlWave XFC. The page opens from defaults and the
information displayed is retrieved from the following file:
(C:\OpenBSI\WebXFC\Config\DefaultMXFC.RCP).
The information displayed is returned from this file. If a user has made changes to the
configuration of the unit, upgrade of the values can be changed by clicking on Load from
RTU. The values in the configuration now reflect the actual configuration of the unit.
Users may save their configuration to a file. First the user should select the file where the
configuration should be save. This is done by clicking on Browse, and selecting an existing
file, or by typing in a new file name to save the configuration. After the file has been
selected, the date is saved by clicking on Write to File.
Figure F-27 - Meter Run Save/Load Configuration Web Page
A user may download a previously saved configuration to the ControlWave XFC. Users
would select the file to download to the unit by clicking on the Browse button to locate it. A
user would then click on Load from File. This will update the recipe with the information