Emerson Process Management ControlWave XFC - Manual (Page 73)

CI-ControlWave XFC Installation & Operation / 2-31
From the Hyperterminal Recovery Mode menu (Figure 2-22), press the ‘F’ key to enter
FLASH download. A message will be displayed warning that the FLASH is about to be
erased; press the ‘Y’ key at the prompt. The screen will display dots as the flash devices are
being erased; this could take a few minutes.
Figure 2-22 - HyperTerminal Recovery Mode Menu
5. When the FLASH is ready for download the letter C will be displayed on the screen. In
the HyperTerminal command bar click on Transfer and then Send File…(see Figure 2-
23). In the Send File Dialog Box (see Figure 2-24), select “1KXmodem” for the protocol,
enter the filename of the appropriate .bin file in the format “CWXxxxxx.bin” (where
xxxxx varies from release to release). Click on the Send button to start the download
(see Figure 2-24). When the HyperTerminal Recovery Mode Menu of Figure 2-22
appears, the download has completed.
Figure 2-23 - HyperTerminal FLASH Download Menu
(Ready to Download) - (Transfer/Send File Selected)