Emerson Process Management ControlWave XFC - Manual (Page 48)

2-6 / Installation & Operation CI-ControlWave XFC
approximately 6.156” in height by 5.00” in width by 6.190” in depth. A GPT
Transducer adds approximately 1.720” to the height of the unit while a MVT
Transducer adds approximately 3.020” to the height of the unit (see Figures 2-2 and 2-
3). Note: Units equipped with a Gage Pressure Transducer CANNOT be
directly mounted to the ‘Main’ (meter run).
Figure 2-2A - ControlWave XFC Pipe Mounting Diagram (Unit shown with MVT)