Emerson Process Management ControlWave XFC - Manual (Page 70)

2-28 / Installation & Operation CI-ControlWave XFC
"Location"
If you want to store the View Mode File in a directory other than that shown in the
"Location" field, enter the new location there, or use the [Browse] push button to find
the directory.
Figure 2-17 - Local View - New View Mode Menu
When the "Mode", "Name", and "Location" have been specified, click on the [Create] push
button to activate the Communication Setup Wizard.
Step 1 - Communication Setup
Choose the communication port you want in the What port would you like to use: field
(see Figure 2-18). Click on the [Next] pushbutton to activate the next wizard.
Figure 2-18 - Communication Setup: Step 1 Menu
Step 2 - Flash RTU Setup
In the Flash RTU Setup Wizard, you need not set the RTU type or local address, since these
are unused in this mode. Click on the [Next] push button to activate the Flash Data Setup
Wizard.