Read codes, Figure 6.1 – Sealey EU908 User Manual
Page 35
with the vehicle. Contact your local distributor or the
manufacturer’s customer service department for assistance.
7） View a summary of system status (MIL status, DTC counts,
Monitor status) on screen. (Figure 6.1 ) Press OK button for
Diagnostic Menu (Figure 6.3) to come up.
System Status
MIL Status
OFF
Codes Found
0
Monitors N/A
8
Monitors OK
2
Monitors INC
0
Save OK
Figure 6.1
• If more than one module is detected, you will be prompted to
select a module before testing. (Figure 6.2 )
Control Module
1. Engine
2. Module $A4
Figure 6.2
• Use the UP/DOWN scroll button to select a module and press
the OK button.
6.1. Read Codes
Reading Codes can be done with the key on engine off (KOEO)
or with the key on engine running (KOER).
Stored Codes are also known as “hard codes”, which are fault
34