Sealey EU908 - Manual (Page 83)

3) In the EPB screen, use the UP/DOWN button to select
Electric parking brake replacement. The screen shows as
below.
Figure 11.17
In the Electric parking brake replacement screen, the tool can
also perform three functions, which details could refer to the
same functions described in the Brake cable replacement menu
above.
Active Test
During an active test, the tool is used for outputting commands to the
ECU in order to drive the actuators. This test determines the integrity
of the system or parts by monitoring the operation of the actuators or
by reading the EPB ECU data.
To carry out an active test, please follow these steps.
Electric parking brake replacement
1.Put in fitting/removal position
2.Cable tensioning
3.Electric parking brake
calibration.
1. Follow the instructions above to display the Diag. menu
screen.(Figure 11.3)
2. Select Active Test and a list of possible tests appear. The test
items in the list vary with different vehicles.
82