Sealey EU908 - Manual (Page 78)

Figure 11.4
EPB
1.Brake cable replacement
2.Electric parking brake
replacement.
2) In the EPB screen, use the UP/DOWN button to select Brake
cable replacement. The screen shows as below.
Figure 11.5
In the Brake cable replacement screen, the tool can perform
three functions.
Brake cable replacement
1.Put in fitting/removal position
2.Cable tensioning
3.Electric parking brake
calibration.
A. Put in fitting or removal position
This function enables you to fit in or remove the brake cable
safely and easily. It will take a few seconds to execute this
command.
Put in fitting/removal position
Activation in progress!
OK
77