Aintenance – Sealey EU908 User Manual
Page 84
Figure 11.18
Active
1.Apply electric parking brake
2.Release electric parking brake
3.
Select a test and the tool will display an information screen as
“The 'apply electric parking brake' operation is used to test
the operation of the brake cables statically. If you start the
actuator test, you must wait for the component to stop
operating before starting another actuator test. Press 'OK'
to apply the electric parking brake or press 'Cancel' to go
back to the list of possible operation.” Select OK to continue
or Cancel to exit.
4.
The tool may display information during and after the test. The
information varies by vehicle.
Figure 11.19
Apply electric parking brake
Listen to the noise of the
Electric motor!
OK
5.
When the test is finished, there may be three results displaying
on the screen.
•
The test is finished successfully.
•
The test is stopped by the user.
83