Emerson Network Router - Manual (Page 51)

Installation and Use Manual 45
Transmitter Configuration, Characterization, and Calibration
Me
te
r V
e
ri
fication
T
ransmitter T
e
rmina
ls
Data Log
g
e
r
T
ra
n
sm
itte
r Co
nf
igu
rati
on
Figure 5-1 Configuration window
Whenever you make configuration changes on a particular tab, the tab color changes to yellow. To
send the changes you have made to the transmitter, click
Apply . To discard changes on an
individual tab, click Cancel .
After you click Apply , the following dialog box appears:
Before you click OK , make sure your process is in a state that can tolerate the new transmitter
configuration. The new value(s) will be sent to the transmitter, and will take effect immediately.
Click
Cancel if this is not acceptable. After you click OK , the tab display color returns to gray.