Emerson Network Router - Manual (Page 89)

Installation and Use Manual 83
Configuring the Discrete Batch Application
In
de
x
Discre
te Batc
h
In
de
x
Discre
te Batc
h
In
de
x
Discre
te Batc
h
In
de
x
Discre
te Batc
h
If the Inhibit Totalizer function is mapped to a discrete input:
• The totalizer will not increment while the discrete input is active.
• The totalizer will resume incrementing automatically when the discrete input becomes
inactive.
• If the discrete input is inactive, the totalizer is active, whether or not a batch is running. Even if
a batch is not running, the totals will be incremented if flow is detected.
If the batch totalizer is inhibited while a batch is running:
• And the No-flow timeout batch control option (see Section B.3.2) is set to 0, no timeout alarm
will be posted.
• And the No-flow timeout batch control option is set to a non-zero value, a timeout alarm will
be posted if the timeout period expires before batch totalizing resumes.
B.4 Running a batch
The ProLink II Run Batcher window, shown in Figure B-4, can be used for batch operation. It
provides the same functionality as the batch process screen on the transmitter display.
Figure B-4 Run Batcher window