Epson EMP-TWD10 - Manual (Page 20)

18
A
Place the unit in a position that will
enable the optimum size image to be
projected on the screen.
When you use a 16:9 ratio, 80” type widescreen,
for example, place the unit approximately 197 cm
away from the screen.
The further this unit is moved away from the
screen, the larger the projected image becomes.
For detailed projection distance values
sp. 69
B
Position this unit so that it is parallel to
the screen.
If this unit is not placed parallel to the screen, the
projected image is distorted in the shape of a
keystone.
If you do not have sufficient space to install the
unit in front of the screen, do not place it to the
side. Adjust the position of the projected image
by shifting the lens.
sp. 21
A
When the unit is placed in front of you,
you can rotate the upper half of the unit
to enable you to easily access the disc
slot to insert or eject a disc. • Note that the upper half of the unit cannot be
rotated into a full 360-degree turn. When you
return the upper half of the unit to its original
position, rotate it in the reverse direction until it
clicks and locks.
• The lamp light darkens if you rotate the upper
section of the unit during projection. When you
hear the click, the unit has locked and the lamp
light becomes brighter.
• When you rotate the unit, the sound from the
left and right built-in speakers is also reversed.
Installation
Projection distance and screen size
* Standard value
Screen
Connecting the power cable
Push the right lens section backward.
Rotate the upper half of the
unit until it clicks and locks.
Be careful not to jam your fingers or other objects when
rotating the upper half of the unit.