Epson EMP-TWD10 - Manual (Page 6)

4
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Unplug the unit from the outlet and refer all repairs to qualified service personnel under the following
conditions:
• If smoke, unusual smells or unusual noises come from the unit.
• If liquid or foreign objects get inside the unit.
• If the unit has been dropped or the case has been damaged.
Continuing to use under these conditions may result in fire or electric shock.
Do not try to repair this unit yourself. Refer all repairs to qualified service personnel.
Place the unit near a outlet where the plug can be easily unplugged.
Never open any covers on the unit except as specifically explained in this guide. Never attempt to
disassemble or modify the unit. Refer all repairs to qualified service personnel.
Electrical voltages inside the unit can cause severe injury.
Do not expose the unit to water, rain, or extensive humidity.
Use only the type of power source indicated on the unit. Use of a power source other than the
specified may result in fire or electric shock. If you are not sure of the power available, consult your
dealer or local electricity company.
Check the specifications of the power cable. Using an inappropriate power cable could result in fire or
electric shock.
The power cable supplied with the unit is intended to comply with power supply requirements for the
country of purchase. If using within the country of purchase, do not use any power cable other than the one
supplied with the unit. If using the unit overseas, check the power supply voltage, outlet shape and
electrical rating of the unit that conform to the local standards, and purchase a proper power cable in the
country.
Take the following precautions when handling the plug.
Failure to comply with these precautions could result in fire or electric shock.
• Do not overload outlets, extension cables or multi-socket devices.
• Do not insert the plug into the outlet with dust present.
• Insert the plug firmly into the outlet.
• Do not handle the plug with wet hands.
• Do not pull the power cable when disconnecting the plug. Always be sure to hold the plug when
disconnecting it.
Do not use the power cable that is damaged. Fire or electric shock may result.
• Do not modify the power cable.
• Do not place heavy objects on top of the power cable.
• Do not bend, twist or pull the power cable excessively.
• Keep the power cable away from hot electrical appliances.
If the power cable becomes damaged (such as the wires becoming exposed or broken), contact your dealer
for a replacement.
If there is an electrical storm, do not touch the plug, otherwise you may receive an electric shock.
Warning
Do not use in
wet areas
Disconnect
the plug from
the outlet
Do not
disassemble
Do not use in
wet areas
Do not do
Instructions
Instructions
Do not do
Do not touch