Epson EMP-TWD10 - Manual (Page 23)

21
Quic
k Star
t
Adjust the volume and image being projected.
Adjusting the projection position and volume
Fine-tuning the projection size
(Zoom ring) Focusing (Focus ring)
Adjusting the image
position (Lens shift)
If the unit cannot be placed at the
front of the screen, or the
projected image is shown too low,
you can move the position of the
projected image up, down, left
and right within the ranges
illustrated on the right, using lens
shift.
Volume control (Volume)
To increase the size,
turn towards “W”.
To decrease the size,
turn towards “T”.
* The clearest image is obtained when both the
horizontal and vertical planes of the lens
shift dial are centered.
Moves
down.
Moves
up.
Moves
to left. Moves to
right.
Using the main
unit Using the
remote control
Standard projection position
(when the lens shift dial is
centered)
Adjustable image shift range
from the standard projection
position
* The image can be moved
to the maximum position
either horizontally or
vertically, but not both.
Example: When shifting the
maximum amount to the
left or right on the
horizontal plane, the
vertical range of the shift
is up to 36% of the height
of the image.
When shifting the
maximum amount up or
down on the vertical
plane, the horizontal
range of the shift is up to
17% of the width of the
image.
When the markings meet, the
image is centered.