Epson EMP-TWD10 User Manual
Page 69
67
Appendix
6
Tighten the lamp attachment screws firmly.
7
Install the lamp cover.
Resetting the lamp operating time
After the lamp has been replaced, make sure you initialize the Lamp Hours
setting.
The unit has a built-in counter that keeps track of the lamp operating time and
the lamp replacement message is displayed based on this counter.
1
Connect the power cable, and press
. If the lamp is not lit,
press .
2
Press
and when the menu appears, set the “Info” to
“Reset Lamp Hours”.
• Install the lamp and the lamp cover securely. For the safety of this unit, the lamp
will not turn on if the lamp or the lamp cover is not installed correctly.
• This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling.
Do not dispose of it with normal waste.