Epson EMP-TWD10 - Manual (Page 51)

49
Adv
anced Oper
ations
Connecting commercially available headphones.
Audio Settings
Caution
• When listening with headphones, make sure the volume is not too high. You may damage your hearing when
listening to sounds at high volume over an extended period of time.
• Do not set the volume too high from the outset. A loud sound may be produced suddenly that may cause damage
to your headphones or your hearing. As a precaution, lower the volume before you switch off this unit then raise it
gradually after you switch it back on.
Once you have connected your headphones to the headphone jack, no sound will come from the speakers. When
connected to a subwoofer, sound will also stop coming from the subwoofer.
Listening with headphones
Headphones
To jack