Epson EMP-TWD10 - Manual (Page 56)

54
Audio page
Others page
Setting Item Setting Contents
Digital Output
Select the kind of output signal according to
the equipment connected to the Optical
Audio-Out port.
For detailed information
sp. 56
Stream: Use when connected to a DTS/Dolby Digital Decoder,
or when connected to equipment with these functions.
PCM: Use when connected to equipment that is only
compliant with Linear PCM.
Night Mode
Compensates for the variation in the way we
hear loud and quiet sounds when playing back
at low volume.
Only available for DVD videos that have been
recorded in Dolby Digital.
Turn the Dolby Digital mode “On” if the volume
of voices in the movie is low.
On: Reduce the loudness but increases volume of quieter sounds.
Off: Use this option to enjoy stereo surround sound.
Setting Item Setting Contents
Screen Saver
Set whether or not to start the screen saver
function if play has stopped and a still image
is projected for approximately 15 minutes
without any unit operation.
On: The Screen Saver function starts.
Off: The Screen Saver function does not start.
PBC
Set to activate the PBC or cancel it during play
of .
On: Starts to play with PBC active. When is played, its
menu screen appears.
Off: Starts to play with PBC inactive. The first and subsequent
tracks are played sequentially.
Display Dim
Controls the brightness of the display window
and indicators.
100%, 70%, 40%, Auto
In the “AUTO” mode, the screen is dark (40% brightness) during
playback but is bright (100%) during pause.
DivX
®
VOD code
The registration codes required for video on-
demand service are provided.
Press and check your registration code that is displayed.
After checking, press .
Using your registration code, you can purchase or rent videos
provided by DivX
®
video on-demand services (www.divx.com/
vod).
MP3/JPEG NAV
Display of hierarchical menu including
folders.
Without Menu: Displays all , and files
contained on a disc.
With Menu: Displays the menu containing folders.
Default
Resets all settings to their initial states, except
for your “Disc Lock” password of the setup
menu and “Reset Lamp Hours” of the visual
setup menu. Press and press to start initialization.
Password
Set your password when you play a disc
protected with a “Disc Lock.”
Using the numeric keys of the remote control, enter your 6-digit
password in the “Old Password” column. When you enter a
password for the first time, enter “000000”.
Enter a new 6-digit password in the “New Password” column. Enter
the new 6-digit password again for confirmation in the “Confirm
PWD” column.
When you press , your new password is registered.
If you cannot remember your password, simply enter “000000” in
the “Old Password” column.