Riello UPS NetMan 204 - Manual (Page 15)

C
ONFIGURATION MENU DESCRIPTION
In order to make a new configuration effective, it is necessary to save it in the flash
memory; this action automatically reboot the NetMan 204 (refer to “Menu Save and load”).
Start menu
Once login has been effected via SSH or USB, a screen like the following is displayed:
/------------------------/
/ Netman 204 /
/------------------------/
Setup..........:<--
View status....:
Change password:
Service log....:
Wi-Fi setup....:no card installed
Expert mode....:
Press [ESC] for logout
SysVer. S15-1 - AppVer. 01.04.000
Function Description
Setup To enter main configuration menu
View status To see the status of the device
Change password To modify the password (see also Password recovery)
Service log To generate a log file of the card (when requested by the service)
Wi-Fi setup
To configure Wi-Fi connection
For Wi-Fi connection, an optional card is required. The Wi-Fi card is not
provided with NetMan 204 but it has to be purchased separately.
Expert mode To enter Expert mode (more information at paragraph “Expert mode”)
To move within this menu and the following menus, use the keys as described in the following
table; the arrow or the cursor shows the current selection.
Key Function
Direction keys (Arrow up, down, right, left) To move the cursor within the menus
Tab
Goes on to next option
Enter (1)
Choice of submenu
Confirmation of characters entered
Esc (1)
Exit main menu (2)
Return to previous menu
(1) Some keys can have a different function depending on the menu.
(2) To exit from a menu a confirmation (‘Y’ or ‘N’) is required after pressing the ESC key.
- 15 -