Riello UPS NetMan 204 - Manual (Page 34)

Wi-Fi setup (optional card required)
For Wi-Fi connection, an optional card is required. The Wi-Fi card is not provided with
NetMan 204 but it has to be purchased separately.
After installing the optional Wi-Fi card, you can access to the "Wi-Fi setup" menu.
For NetMan 204, Wi-Fi is an exclusive alternative to cabled Ethernet: only one at time can
be used. Therefore, after enabling Wi-Fi, it is not more possible to use cabled Ethernet.
After selecting Wi-Fi setup you get this prompt:
Wi-Fi Configuration
Do you want to use Wi-Fi instead of Ethernet [y/n]?
Insert 'n' to use Ethernet or 'y' to use Wi-Fi. In the latter case, a list of available Wi-Fi access points
will be shown with the following request:
Please insert the SSID you want to connect without quotes
Type the SSID of the desired Wi-Fi access point.
Please insert the password for <Wi-Fi access point>
Here you insert the authentication password for Wi-Fi.
OK, you want to connect to <Wi-Fi access point> with password <Wi-Fi
password>.
Confirm [y/n]? >
After confirmation, you will return to the Main setup. At the next boot the NetMan 204 will use Wi-Fi
instead of Ethernet.
- 34 -