Riello UPS NetMan 204 - Manual (Page 38)

<securityType> is the minimum security level that must be used to gain access to this access right.
Possible values are:
• noauthnopriv (no authentication and no privacy)
• authnopriv (authentication but no privacy)
• authpriv (authentication and privacy)
<contextMatch> the type of match required. Possible values are:
• exact (the context name must exactly match the value in contextName)
• prefix (the context name must match the first few starting characters of the value in
contextName)
<readView> the authorized MIB view name used for read access, must match one of the view
name.
<writeView> the authorized MIB view name used for write access, must match one of the view
name.
<notifyView> the authorized MIB view name used for notify access, must match one of the view
name.
The correct syntax for addView is:
addView <viewName> <subtree> <mask> <included>
<viewName> is the name of the view.
<subtree> is the OID subtree which when combined with the corresponding instance of MASK
defines a family of view subtrees.
<mask> the mask for filtering OID.
<included> the OID can be included or excluded. Possible values are:
• included (for including)
• excluded (for excluding)
The correct syntax for addManager is:
addManager <security> <ipAddress> <credentials> <securityType>
<security> is the security type for the notification. Possible values are:
• USM (User-based Security Model with SNMPv3)
• V2 (SNMPv2)
• v1 (SNMPv1)
<ipAddress> is the IP address of the SNMP manager.
<credentials> is either the user name (when using USM security) or the trap community (when
using v1 security)
<securityType> is either:
• noauthnopriv (for SNMPv1 and SNMPv2)
• authpriv (for SNMPv3)
addManager do not allow duplicate entries (one ipAddress can receive only one trap).
A sample snmp.conf is provided; the default users authorized are:
Name Auth protocol Priv protocol Auth password Priv password
unsecureUser Noauth nopriv
MD5 md5 nopriv MD5UserAuthPassword
SHA Sha nopriv SHAUserAuthPassword
MD5DES md5 des MD5DESUserAuthPassword MD5DESUserPrivPassword
SHADES Sha des SHADESUserAuthPassword SHADESUserPrivPassword
The SNMP agent will send SNMPv3 trap to address 10.2.10.1.
- 38 -