TA Triumph-Adler FAX 942 - Manual (Page 100)

5-30
Operation
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Operation Gb.fm
MBX deposit in a remote fax

Insert the document in the fax machine’s feeder.

Select M 35 OK - FAX / MBX SENDING and confirm with OK.

Enter your subscriber’s number for MBX deposit or choose your dialing mode (refer to
paragraph Dialling, page 5-2) and validate with OK.

Enter the subscriber’s MBX number and confirm with OK.

If you wish to delay transmission, enter the new transmission time next to the current time and
press OK.

If you wish to modify the document feed type, select one of the options FEEDER or MEMORY ,
and press OK.

If you wish, you may enter the number of pages of your document before transmitting.

Confirm the transmission request to a remote MBX fax by pressing key .
In the case of an immediate transmission, the document is sent immediately.
If the document is set for a postponed transmission the document will be stored in the memory and sent
at the requested time.
MBX polling from a remote fax
M 36 OK - FAX / MBX POLLING

Enter your subscriber’s number for MBX deposit or choose your dialing mode (refer to
paragraph Dialling, page 5-2) and validate OK.

Enter the subscriber MBX number and press OK.

Enter this MBX access code and press OK.

If you wish to delay the poll time, enter the departure time next to the current time.

Confirm the MBX poll request by pressing key .
As soon as the remote fax is subscribed, either immediately or later, the document(s) in the remote fax
MBX are receveid in your fax.
Remark: Please check for remote fax compatibility.