TA Triumph-Adler FAX 942 - Manual (Page 57)

Setting your machine
3-21
Op
eration
Se
tting y
o
ur
mac
h
ine
Getting started
Directory
M
aintenance
Safety
Contents
Installation
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Setting your machine Gb.fm
SMS
SERVICE
Thanks to the button you can send an SMS to subscribers all over the world. An SMS (Short
Message Service) is a service which permits short written messages to be sent to mobile phones
or other SMS-compatible devices.
The number of characters you can send per message is dependent upon the service provider and
the country you are sending your SMS from (e.g. France 160 characters, Italy 640 characters).
The SMS service is dependent upon the country and the service provider.
Caution - There is a special scale of charges for the SMS service.
SMS P
ARAMETERS
This menu is used to set several options:
• automatic SMS print on reception,
• beep activated during SMS reception,
• send your details activated,
• the address of your terminal.
The address is only modified if several terminals are installed on your line. It is used to
differentiate between two machines during SMS reception.
When you want a contact to send SMSs to the terminal you choose, you must send him your line
number and the destination terminal address.
If your contact does not add the address of the terminal, the SMS will be received in the terminal
with address 0.
M 45 OK - SMS SERVICE / PARAMETERS

Automatic print of SMS received.
M 451 OK - SMS SERVICE / PARAMETERS / AUTO PRINT

Select the option WITH or WITHOUT automatic print, then validate with OK.

Beep activated on SMS reception.
M 452 OK - SMS SERVICE / PARAMETERS / BEEP SMS

Select the option WITH or WITHOUT beep on reception, then validate with OK.

Presentation of SMS sender.
M 453 OK - SMS SERVICE / PARAMETERS / SENDER NAME

Select the option WITH or WITHOUT presentation of the sender, then validate with OK.

Terminal address.
M 454 OK - SMS SERVICE / PARAMETERS / TERM. ADDR.

Enter the terminal number, then validate with OK.