TA Triumph-Adler FAX 942 - Manual (Page 25)

Installation
1-15
Op
eration
Setting yo
ur
machine
Getting started
Directory
M
aintenance
Safety
Contents
Inst
all
a
tio
n
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Installation Gb.fm
T
ELEPHONE AND
LAN
CONNECTION

Plug end of the telephone line (1) into the connector on the fax machine (A), and the other
end into the wall telephone socket.

LAN connection (depending on model). Plug end of the LAN cord (as provided by your
network administrator) into port (B) of your fax machine and the other end into your local
network port dedicated to your fax machine.
P
OWER LINE CONNECTION AND SWITCH
-
ON
Caution - Refer to safety procedures in the Safety and Environment Chapter.

Plug end of the main power cord (2) into the connector (B) on the fax machine, and the
other end in the wall outlet.

Set the On/Off switch to position 1 (On).
After a few seconds, when the printer has warmed up, the date and time will appear.
To set the language and the time of your terminal, refer to paragraph Setting your machine,
page 3-1.

Installing the Duplex-unit

(depending on model or option)

After installation and connection, the duplex-unit will enable you to print, receive faxes or
to receive local photocopies in mode.

Switch off your terminal and pull out the mains plug.