TA Triumph-Adler FAX 942 - Manual (Page 116)

6-16
Maintenance
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Maintenance Gb.fm
Cleaning the paper feed roller

1 - Turn off the printer and unplug the power cord.

2 - Remove the drum/toner cartridge set from the machine.

3 - Use a soft cloth to clean the paper feed roller located under the fusing unit.

4 - Put the drum/toner cartridge set back in place (refer to paragraph Replacing cartridges,
page 6-2).

5 - Close the printer cover, connect the power lead and power the machine using the switch
located on the front left hand side.
Caution - The fusing unit located inside the printer above the paper supply roller may become
burning hot during machine operation. Avoid touching it ; you could hurt yourself.