TA Triumph-Adler FAX 942 - Manual (Page 48)

3-12
Setting your machine
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Setting your machine Gb.fm
Manual configuration
To configure your terminal manually, you should obtain the usual information used to set a peripheral
device (IP address, sub-network mask, network and gateway address).
To configure the local network setting manually:
M 2531 OK - SETUP / NETWORKS / LOCAL NETWORK / CONFIGURATION

Choose MANUAL , and press OK to confirm.
IP address
M 2532 OK - SETUP / NETWORKS / LOCAL NETWORK / IP ADDRESS

Enter the IP address of your terminal and press OK to confirm.
Sub-network mask
M 2533 OK - SETUP / NETWORKS / LOCAL NETWORK / SUBNET MASK

Enter the sub-network mask of your terminal and press OK to confirm.
Gateway address
M 2534 OK - SETUP / NETWORKS / LOCAL NETWORK / GATEWAY

Enter the IP address of the network gateway and press OK to confirm.
IEEE address (or Ethernet address) or MAC address
M 2535 OK - SETUP / NETWORKS / LOCAL NETWORK / IEEE ADDRESS
The Ethernet card of your terminal already has an unmodifiable, yet consultable, IEEE address.
Netbios names
These names, which can be used with the network options, are used to identify your terminal machine
from a PC connected to a local network (for instance with the name "IMP-NETWORK-1").
M 2536 OK - SETUP / NETWORKS / LOCAL NETWORK / NETBIOS 1 NAME
M 2537 OK - SETUP / NETWORKS / LOCAL NETWORK / NETBIOS 2 NAME

Enter the selected name (15 characters max) and press OK to confirm.
The WINS1 and WINS2 servers, used with the network options, allow access to terminals on other
sub-networks by means of their NetBIOS name.
These two addresses must be filled in for the Scan To Disk function.
M 2538 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 1
M 2539 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 2

Enter the IP address of each server, then validate with OK.