TA Triumph-Adler DC 2216 - Manual (Page 100)

Job Accounting
6-4 OPERATION GUIDE
3 Press [OK].
4 Input the Department ID Code to be deleted using the numeric keys.
NOTE: If a mistake is made during input it can be cleared by pressing
[Stop/Clear] and the value reentered.
5 Confirm the code to be deleted and then press [OK].
6 Press
U or V and select Yes. To cancel deletion, select No.
7 Press [OK]. The display will return to that of Step 2.
Clearing the Job Accounting Count
The Total No. of Copies Count for all departments can be cleared.
1 Display the Job Accounting. (Refer to Job Accounting Operations
Procedures on page 6-2.)
2 Press U or V to display 04.Count
Clear .
3 Press [OK].
4 Press
U and select Yes. To cancel the clearing of the count, select No.
5 Press [OK]. The counter will be cleared and the display will return to that
of Step 2.
Outputting the Job Accounting List
The Total No. of Copies by department can be output.
1 Display the Job Accounting. (Refer to Job Accounting Operations
Procedures on page 6-2.)
2 Press U or V to display 05.Print list.
NOTE: Check to make sure that Letter/A4 size paper is loaded in the
cassette.
3 Press [OK]. The list will be output and the display will return to that of Step
2.
Job Accounting:
04.Count Clear
Job Accounting:
05.Print list