TA Triumph-Adler DC 2216 - Manual (Page 89)

System Setting
OPERATION GUIDE 5-17
8 Press
U or V and input the Width Size.
5.88 to 17.00(")/148 to 432 (mm): The range
in which setting is possible.
9 Press [OK]. The display will return to that of Step 2.
Selecting Media Type (Cassettes 1 to 4)
Specifies the media type to the cassette 1 to 4. These cassettes support
the following media type.
Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color (Colour),
Prepunched, High Quality and Custom 1-8
The setting of Cassette 1 is shown here as an example, select
27.Casst2MedType
, 28.Casst3MedType and 29.Casst4MedType in
the System Menu before selecting Cassette 2, 3 and 4 (option),
respectively.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press U or V to display
26.Casst1MedType .
3 Press [OK].
4 Press U or V to select the desired media type.
5 Press [OK]. The display will return to that of Step 2.
Specifying the Paper Weight and 2-sided Copying to Custom Paper
Assigns one of the following paper weights to the Custom paper. And you
can determine whether 2-sided copying is allowed to the custom paper. Up
to 8 custom paper are configurable.
Extra Heavy, Heavy3, Heavy2, Heavy1, Normal3, Normal2, Normal1 and
Light (Vellum)
The setting of Custom 1 is shown here as an example, select
31.CustmMedType2
, 32.CustmMedType3, 33.CustmMedType4,
34.CustmMedType5 , 35.CustmMedType6, 36.CustmMedType7 and
37.CustmMedType8 in the System Menu before selecting Custom 2, 3,
4, 5, 6, 7 and 8, respectively.
NOTE: 2-sided Copying setting will be displayed only when the optional
Duplex Unit is installed.
Refer to the following media types and weights (g/m
2
)
Non-std size W
148mm
System Menu:
26.Casst1MedType