Procedure for changing the default settings, User status report, Message language – TA Triumph-Adler DC 2216 User Manual
Page 80: Procedure for changing the default settings -8, Copy status, System menu: 01.copy status, System setting 5-8 operation guide, Press [ok, Press u or v to display 01.copy status, Press u or v and select yes
System Setting
5-8
OPERATION GUIDE
NOTE:
The message display will return to the Ready to copy. by
pressing [Reset].
You can cancel the setting by pressing [Stop/Clear].
4
Press [OK].
Procedure for Changing the Default Settings
The procedure for changing each of the items in the System Menu is
described below.
User Status Report
Outputs a list of the values set for the System Menu items.
NOTE:
Check to make sure that Letter/A4 size paper is loaded in the
cassette.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press
U or V to display 01.Copy
Status
.
3
Press [OK].
4
Press
U or V and select Yes.
5
Press [OK]. The report will be output.
Sample: User Status
Report
Message Language
You can select the language of the message display by following the
procedure given below.
System Menu:
01.Copy Status
USER COPY SETTING LIST
F00 : [ - - - - - - - - - - - - - - - - - - - - - - - -] ==========
F01 : [ - - - - - - - - - - - - - - - - - - - - - - - -] ==========
F02 : [ - - - - - - - - - - - - - - - - - - - - - - - -] =======
F03 : [
=======
] ==========
F04 : [
=====
] ==========
F05 : [
====
] =======
F07 : [
======
] ==========
F08 : [
======
] ==========
F09 : [
=
] ==========
F10 : [
=
] ========
F11 : [
=
] ==========
F12 : [
=
] ========
F13 : [
======
] ==========
F14 : [
======
] ==========
F15 : [
======
] ==========
F16 : [
=====
] ==========
F17 : [
====
] =========
F18 : [
======
] ==========