TA Triumph-Adler DC 2216 - Manual (Page 59)

Copying Functions
OPERATION GUIDE 4-9
Setting the Margin
Use the procedure given below to change the Margin.
1 Press [Margin] for 3 seconds. The System
Menu for the Margin will be displayed.
2 Press U or V and select the binding margin width.
[Inch specifications]
0.13 /0.25/0.38/0.50/0.63/0.75("): the range in which the margin can
be set.
[Metric specifications]
A margin from 1 to 18 (mm) can be set.
3 Press [OK]. The display will blink and the copier will return to the state
where copying can be continued.
43.Stitch Width
1mm