TA Triumph-Adler DC 2216 - Manual (Page 35)

Preparations
OPERATION GUIDE 2-5
When the paper has become wrinkled from moisture, set the paper so that
the wrinkled side is towards the Length Guide.
NOTE: When loading paper into the cassette, set it so that the side that
is to be copied faces upwards.
6 Set the accompanying paper
sheet so that the paper size set in
the cassette can be identified
from the front of the cassette.
7 Gently push in the cassette.
NOTE: When the copier will not be used for a long period of time, remove
the paper from the cassette, put it in a storage bag and seal the bag in
order to protect the paper from humidity.
Cassette Size Detection
Set the Size Detection on the operation panel to match the size of the
paper loaded in the cassette. The copier has been set at the time of
shipping for automatic detection in inch units for inch specifications, or in
centimeter units (A
⋅B columns) for metric specifications.
1 Press [Paper Selection] for 3 seconds. The System Menu will be
displayed.
2 Press
U or V to display the
19.Cassette1Size .
NOTE: When setting the size of the optional cassette (2 to 4), display
20.Cassette2Size , 21.Cassette3Size and 22.Cassette4Size.
3 Press [OK].
4 Press U or V and select Auto Detect mm, AutoDetect inch or
Oficio 2 .
5 Press [OK]. The display will blink and copying can begin.
System Menu:
19.Cassette1Size