TA Triumph-Adler DC 2216 - Manual (Page 84)

System Setting
5-12 OPERATION GUIDE
4 Press
U or V and select an exposure from 1 to 7.
5 Press [OK]. The display will return to that of Step 2.
Text Exposure Adjustment
Adjusts the median exposure value of the copy for the Text original.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press U or V to display 10.Text
Density .
3 Press [OK].
4 Press U or V and select an exposure from 1 to 7.
5 Press [OK]. The display will return to that of Step 2.
Processing to Reduce Black Line
It is possible to make black line less noticeable when it appears when using
the optional Document Processor. Using processing to reduce black line
decreases the reproduction quality of small characters, so it is
recommended that the copier normally be used at the factory default
setting.
NOTE: When Photo Mode has been selected in Image Quality Mode,
processing to reduce black line is not possible.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press
U or V to display
11.ReduceStreaks .
3 Press [OK].
4 Press U or V and select Off, Weak or Strong.
5 Press [OK]. The display will return to that of Step 2.
Photo Processing
Select the processing method for photo originals.
System Menu:
10.Text Density
System Menu:
11.ReduceStreaks