TA Triumph-Adler DC 2218 - Manual (Page 23)

Names of Parts
1-6
35 Stop/Clear key — Press this key to stop copying or to change the number of copies. Also
press this key to return to the previous screen from a setting screen for copier functions or the
like.
36 Start key and indicator — Press this key to start copying. Copying will start immediately if you
press this key when the indicator is lit green.
37 Main power indicator — Lights up when the main power switch is turned on ( | ).
† Initial mode (the state that the machine enters at the end of warm-up or when the Reset key is
pressed)
In the factory default setting, paper of the same size as the original is selected automatically
(auto paper selection mode), the copy magnification ratio is set to 100 %, the number of copies
to be made is set to 1 and the image quality is set to the Text + Photo mode.
Notes • The settings for the initial mode can be changed using the default setting procedure. This
includes changing the cassette selected in the initial mode,the image quality mode, and the
exposure (Auto exposure mode).
Auto Clear Function
Once a designated amount of time has passed after copying stops (between 10 and 270 seconds),
the machine will return to the same settings as those after warm-up. Copies can continually be
made using the same settings (copy mode, number of copies, and exposure mode) if the next batch
of copying is started before the auto clear function is activated.