TA Triumph-Adler DC 2218 - Manual (Page 50)

Basic Operation
3-9
Collated Copying
A number of collated copy sets can be produced.
Note If the optional document processor is installed, you can select whether or not to turn on the sort
mode at a default setting.
1 Set the original.
2 Press the Collate key.
3 Input the number of copies and press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
4 Replace the original and press the Start key. Scanning of the original starts.
5 If no original remains, press the Enter key. Copying starts.
Original Copy
!
!
!
!