TA Triumph-Adler DC 2218 - Manual (Page 56)

Basic Operation
3-15
Interrupting Printing
1 Press the Interrupt key during a print job.
Select Interrupt mode
is displayed.
Note If the machine has neither print data nor received fax data,
Interrupt mode OK Interrupt
mode
is displayed. Proceed to step 4.
2 The example at the right shows the machine has both
printing data (2) and received FAX data (3) queued
inside. Press the S key or the T key to select from the
following options:
• To make copying by interrupting the ongoing print job or FAX print job, select (1). Proceed as
the previous section to perform copying.
• To let the machine complete printing a print job, select (2).
• To let the machine complete printing a (received) FAX job, select (3).
•
Priority:Printer
is displayed when the machine has print data.
•
Priority:Fax
is displayed when the machine has received fax data.
3 Press the Enter key.
4 When the ongoing printing has been completed, set the original for interrupt copying and perform
copying.
5 After the copy job is done, press the Interrupt key. The subsequent print job resumes.
Select Interrupt mode.
Interrupt copy
Priority:Printer
Priority:Fax