TA Triumph-Adler DC 2218 - Manual (Page 37)

Preparations
2-12
Network (TCP/IP) Settings
Register the IP address of this machine.
Notes • To obtain the IP address to enter, check with your network administrator before performing this
setting.
• Before entering the IP address by following the instructions below, be sure to turn the DHCP
setting
Off
and the TCP/IP setting
On
.
1 Press the Print key.
2 Press the S key or the T key to select
MENU
.
3 Press the Enter key.
4 Press the S key or the T key to select
Interface
.
5 Press the Enter key.
6 Press the S key or the T key to select
Network
.
7 Press the Enter key.
8 Press the S key or the T key to select
TCP/IP
.
9 Press the Enter key.
10 Press the S key or the T key to select
Change #
.
11 Press the Enter key.
12 Press the S key or the T key to select
IP Address
.
13 Press the Enter key.
14 Use the numeric keys to input the IP address. Enter the
first block of 3 digits of the address in the highlighted
area.
GO
CANCEL
Ready
MENU
Back
Print Status Page
Menu
Interface
Back
USB
Interface
Network
Back
NetWare
Network setting:
TCP/IP
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
IP Address
0 0 . . 0 0 .