TA Triumph-Adler DC 2218 - Manual (Page 39)

Preparations
2-14
Setting Date and Time
Set the current date and time, time difference from the Greenwich Mean Time (GMT), and summer
time.
1 Press the System Menu/Counter key.
2 Press the S key or the T key to select
Machine
default
.
3 Press the Enter key.
4 Use the numeric keys to input the four-digit
management code. The management code factory
default setting is'1800' for the 18-ppm model; and
'2200' for the 22-ppm model. The Machine default
screen is displayed.
5 Press the S key or the T key to select
Date/Time
.
6 Press the Enter key.
Setting Time Zone
7 Press the S key or the T key to select
Time Zone
.
8 Press the < key or the > key to turn Daylight Saving Time
On
or
Off
.
Next, set the time of the of day.
Setting Time of Day
9 Press the S key or the T key to select
Time
.
10 Press the < key or the > key to set the current time.
Next, set the daylight saving time if observed.
Job Accounting
System Menu / Counter:
Copy default
Machine default
Enter pin code using # key.
End
Auto Casstte SW
Machine default:
Paper Size(1st)
On
Auto I
:
:
Date/Time:
Key Sound On /Off On :
Machine Default :
Low Power Time : 1 Min.
06:33 :
Time Zone
Date/Time:
Time
DST
06:33
Off
GMT+00:00
:
:
:
End
Time
Date/Time:
DST
06:33
Off
:
: