TA Triumph-Adler DC 2218 - Manual (Page 57)

Basic Operation
3-16
Low Power Mode
Pressing the Energy Saver key puts the machine into a resting state (low power mode) even when
the main power switch is on. Only the Energy Saver indicator, Power indicator, and main power
indicator will light up and the other indicators will go out on the operation panel.
Press the Energy Saver key again to resume copying operations. The recovery time before copies
can be made is 10 seconds.
Note If the machine detects print data or received fax data in the low power mode, the machine will
automatically recover and output of data will start.
This machine is equipped with the auto low power function that automatically puts this machine into
the lower power mode if no operation has been performed on the machine for a preset period of
time. The factory default setting time is one minutes (1 to 120 minutes (in 1 minute increments
)).