TA Triumph-Adler DCC 2726 - Manual (Page 100)

FAX Operation (Advanced)
4-41
4
Program Dial
You can register transmission requirements such as the other party to which you send originals and
transmission time as a program. After registration, you can recall transmission requirements only by pressing
the program number. Also, you can assign names to programs to make recalling programs easier and more
convenient.
NOTE: The copy function can be also registered to the program. Up to 4 programs including copying and
sending functions can be registered.
When user login has been enabled, only the administrator can register.
Registering Programs
1 With transmission requirements to be registered
are set, press the Program key and hold it (2
seconds). The program is registered to the key.
When you press a number where a program is
already registered, proceed to the next step.
2 Press the U or V key to select [Overwrite].
3 Press the OK key.
4 Press [Yes] (the Left Select key). The program is
registered, overwriting the previous one.
Deleting Registration Contents
1 Press the Program key where a program you want
to delete is registered, and hold it (2 seconds).
2 Press the U or V key to select [Delete].
3 Press the OK key.
4 Press [Yes] (the Left Select key). The program is
deleted.
Using Program Dial
1 Press the Program key.
2 Place the originals.
NOTE: You can also use the program you have called
up to change transmission requirements such as
changing the other party.
3 Press the Start key. Transmission begins.