TA Triumph-Adler DCC 2726 - Manual (Page 139)

Setup and Registration
6-10
Prohibiting FAX Printing at Specified Times (Unusable Time)
This feature sets a time period during which the machine will not print received faxes.
Faxes received during this Unusable Time are printed when the setting is unlocked.
IMPORTANT: When Unusable Time is set, in addition to FAX printing, all other operations are all prohibited
during the unusable time period, including printing of copy jobs, printer jobs and received e-mails, printing and
sending from USB Memory and Network FAX transmission.
1 Refer to Basic Operation Procedure on page 6-7.
2 Press the U or V key to select [Timer Setting].
3 Press the OK key.
If user management or account management is
enabled, the login screen will appear. For the login
procedure, refer to Account Management on
page 4-51.
4 Press the U or V key to select [Unusable Time].
5 Press the OK key.
6 Press the U or V key to select [On].
7 Press the OK key.
8 Press the U or V key to enter the start time.
9 Press the OK key.
10 Press the U or V key to enter the end time.
11 Press the OK key.
NOTE: If the same time is set as the start time and
end time, you cannot use all day.
12 Specify the code to temporarily cancel the
unusable setting during unusable time.
Set a four digit [Unlock Code] using the numeric
keys.
NOTE: To use the machine temporarily during
unusable time, press [Code] (the Right Select key) in
the Unusable Time message screen. Then, enter the
Unlock code using the numeric keys and press [Login]
(the Right Select key).
13 Press the OK key.