TA Triumph-Adler DCC 2726 - Manual (Page 36)

FAX Operation (Basic)
3-7
3
IMPORTANT:
•If you select a high resolution, the image
becomes clearer. However, the higher the
resolution is, the longer the send time is.
•When you send originals at a resolution of 200 ×
400 dpi (Super Fine) or higher, the fax machine
on the receiving system needs to be capable of
receiving the originals at such image quality.
When the receiving system does not have
such capability, originals are sent at an image
quality of 200 × 200 dpi (Fine).
Selecting the Density
6 Adjusting the density when scanning originals
•Manual (-3 to +3): You can adjust the density
using seven levels.
•Auto: The optimal density is chosen according to
the density of the originals.
1 Press the Function Menu key.
2 Press the U or V key to select [Density].
3 Press the OK key.
4 Press the U or V key to select [Auto] or
[Manual].
5 Press the OK key. Proceed to the next step if
you selected [Manual] in step 4.
6 Press the U or V key to select the desired
density.
7 Press the OK key.
Density: a b
*********************
2 Manual 1 *Auto
Manual: a b
*********************
2 v Lighter -2
3 w Lighter -1 1 u Lighter -3