TA Triumph-Adler DCC 2726 - Manual (Page 140)

Setup and Registration
6-11
6
DRD Reception
This reception mode utilizes the Distinctive Ring Pattern service available through some telephone companies.
With this service, you can use two or more fax numbers on a single telephone line. Thus, you can use this fax
and a telephone on the same line, and you can still designate a different fax number for each of them. As each
number is given a different ring pattern, the machine is able to differentiate between incoming calls. If one of
these numbers is designated for the machine, and a desired ring pattern is designated for that number in
advance, fax reception will be initiated automatically whenever the machine detects the ring pattern distinctive
to the fax.
NOTE: Using DRD Reception to receive a telephone call is only possible if a separately purchased telephone
is connected to the machine. DRD reception is only possible if you subscribe to the Distinctive Ring Pattern
service provided by your telephone company. Contact your telephone company for further information on the
Distinctive Ring Pattern service available.
Flow of reception
Preparation: Refer to Receiving Mode on page 6-17 to select [Auto (DRD)].
1 When a call comes in, the telephone will ring.
NOTE: If you lift the handset while the telephone is
still ringing, the machine will deal with the call in the
same manner as standard Manual FAX Reception. For
details, refer to Manual Reception on page 4-12.
FAX Telephone
If the other party has
dialed your fax number... If the other party has
dialed your telephone
number...
Telephone company
The fax machine will ring
using the predetermined
ring pattern for a fax and
fax reception will start
automatically. (The fax will
handle the call using the
Automatic FAX Reception
mode.) The fax machine will ring
using the predetermined
ring pattern for a telephone
call. Conversation is
possible with the other
party if you answer the
telephone that is
connected to this fax
machine.