TA Triumph-Adler DCC 2726 - Manual (Page 65)

FAX Operation (Advanced)
4-6
Standby Transmission
During a communication, you can scan originals and schedule a next transmission. When the first
communication is completed, the machine automatically starts the scheduled next transmission. When using
standby transmission, you do not need to wait when a communication has prolonged due to broadcast
transmission.
NOTE: Together with delayed transmission, up to 30 transmissions can be scheduled.
You can use other functions such as broadcast transmission.
For the transmission method, use memory transmission. To select memory transmission, refer to Selection of
Transmission Method on page 3-2.
1 Press the FAX key.
2 Place the originals.
3 Select the destination, and set transmitting
functions if you want to use any.
4 Press the Start key. Scanning of the originals
starts, and the next transmission is scheduled.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-13.
5 When the communication is completed, the
scheduled transmission will begin.