Amprobe Telaris-ISO-PRO Insulation-Tester User Manual
Page 23
21
Clearing all Measurement Values Saved:
1)
Set measurement function selection dial (19) to one of the 7 measurement functions.
2)
Press the ”Clear" key (25) for approx. 5 seconds
3)
An acoustic signal is audible. The number of all measurement data saved is displayed.
The number of the measurement values is reduced by 1.
4)
After approx. 2 s the last measurement value saved is deleted and an acoustic signal
is audible.
5)
After further 2 seconds another acoustic signal is audible and all data is cleared. "0”
is briefly displayed in the small result window. The memory is now completely cleared.
The symbol "M" disappears from the display.
LCD Backlight
The key
(27) is used to switch the backlight on or off. After approx. 20s following the last
key pressing or the last measurement function selection dial operation, the backlight is
automatically switched off to reduce battery consumption.
PAEB30872322:Layout 1 02.10.2008 15:56 Uhr Seite 21