Amprobe Telaris-ISO-PRO Insulation-Tester - Manual (Page 25)

23
Measurement Function Display Signification
Riso M Ω/GΩ (blinking) Test voltage present at output sockets.
Measurement running.
Riso Limit value for Riso is 0.5 M
Ω
Riso Limit value for Riso is 1 M
Ω
Riso Limit value for Riso is 2 M
Ω
Riso Function-Timer measurement is
switched
UProtection Level Overflow, either no overvoltage
protection device connected or the
measurement value is exceeding 625
VAC.
UProtection Level Overflow, either no overvoltage
protection device available or the
measurement value is exceeding 1000
VDC.
All LC backlight is switched on.
All Overflow display, insulation resistance
> 1.999 G
Ω
All (blinking)-batteries are empty,
instrument operation is no longer
possible, the instrument will switch off
shortly.
All Minimum one measurement result is
stored into the memory.
All The saved data is presently sent via the
serial interface.
All --- The instrument is ready for operation.
All - The instrument is currently running a
measement.
PAEB30872322:Layout 1 02.10.2008 15:57 Uhr Seite 23