PLANET FGSD-1008HPS - Manual (Page 23)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
23
2.2 Installing the Switch
This section describes how to install your PoE Web Smart Switch and make connections to the PoE Web Smart Switch. Please
read the following topics and perform the procedures in the order being presented. To install your PoE Web Smart Switch on a
desktop or shelf, simply complete the following steps.
Because FGSD-1008HPS and FGSW-2624HPS4 installation methods are the same as
FGSW-1816HPS, FGSW-1816HPS is picked as an example.
2.2.1 Desktop Installation
To install the PoE Web Smart Switch on desktop or shelf, please follow these steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the PoE Web Smart Switch.
Step 2: Place the PoE Web Smart Switch on the desktop or the shelf near a DC or PoE-in power source, as shown in Figure
2-4 .
Figure 2-4 Place the PoE Web Smart Switch on the desktop
Step 3: Keep enough ventilation space between the PoE Web Smart Switch and the surrounding objects.
When choosing a location, please keep in mind the environmental restrictions discussed in Chapter 1,
Section 4 under specifications.
Step 4: Connect the PoE Web Smart Switch to network devices.
Connect one end of a standard network cable to the 10/100/1000 RJ45 ports on the front of the PoE Web Smart Switch .
Connect the other end of the cable to the network devices such as printer server, workstation or router.