PLANET FGSD-1008HPS - Manual (Page 33)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
33
Figure 3-5: Planet Smart Discovery Utility Screen
1. This utility shows all necessary information from the devices, such as MAC Address, Device Name, firmware version and
Device IP Subnet address. It can also assign new password, IP subnet address and description to the devices.
2. After setup is completed, press the “Update Device”, “Update Multi” or “Update All” button to take effect. The meaning
of the 3 buttons above are shown below:

Update Device : use the current setting on one single device.

Update Multi: use the current setting on multi-devices.

Update All: use the current setting on whole devices in the list.
The same functions mentioned above also can be found in “Option” tools bar.
3. To click the “Control Packet Force Broadcast” function, it allows you to assign a new setting value to the Web Smart
Switch under a different IP subnet address.
4. Press the “Connect to Device” button and the Web login screen appears in Figure 3-2.
5. Press the “Exit” button to shut down the Planet Smart Discovery Utility.